How to Paint and Distress Furniture With Deco Art Chalk Paint

WITH WATER

A simple way to distress a piece is by simply using a clammy, soft rag. This method can be done when Chalky Finish paints are applied over an existing finish or another Chalky End paint color. Water sorry should be done inside fifteen-45 minutes of paint application for best results. If paint has had time to dry, you lot will need to distress with sandpaper instead.

1. Wet a rag with clean h2o.
2. Wring out backlog h2o
3. Rub over areas you wish to distress until the desired amount of paint is removed.

TIP: When working on a large surface, piece of work one section at a time. Rinse rag clean from time to time or use multiple rags.

WITH SANDPAPER

Using sandpaper to distress a piece gives more control over the finished expect. Paint should be dry before sanding. Don't use steel wool to distress Chalky Cease pigment; information technology will exit a grey stain.

1. Select a fine-grit sandpaper to starting time with, such as a 220-grit.
2. Use a light bear on unless y'all want to accept information technology downwards to the bare wood. Get over the raised areas, edges, handles, etc. Imagine where the natural wear would be on the piece, and use sandpaper to mimic the passing of time.
3. Use more pressure or a coarse-dust sandpaper to remove more or all paint in distressed areas.

TIP: If the piece has an image transfer or stenciled design on information technology, distress with a pocket-size piece of creased/folded sandpaper. Apply force per unit area and pull in one direction beyond the image. You don't need to sand dorsum and forth as when you are smoothing out a surface.

TIP: You tin distress before or after waxing. There is less mess when deplorable Subsequently waxing. However, additional wax should be applied over sanded (unsealed) areas.

WITH Hard WAX

To use wax as a resist, rub a wax candle or bar of paraffin wax heavily over the areas where you want the colour below to show through. Make sure you wipe away any loose wax with a clean, dry cloth before applying topcoat. Areas coated in the resist will allow the topcoat to exist easily removed.

WITH PETROLEUM JELLY

To utilize petroleum jelly as a resist, use a soft rag, castor, or fingertips to use to areas where you don't desire the paint to stick. When applying the next layer of paint over the petroleum jelly, make sure not to brush over it as well many times. If you do, the brush will get-go to choice upwards and spread the jelly to other parts of the piece. If you are working on a larger piece of furniture particular, y'all might want to piece of work in smaller sections, washing and drying the castor periodically to forbid a build-up of the petroleum jelly. Make sure you remove all petroleum jelly when top coat is dry out.

Americana Decor Chalky Finish paints are beautiful when layered and so distressed to reveal multiple layers of color underneath. It can be fun to have a bright, vivid color peeking out from underneath a more muted tone. Visible layering of colors gives the impression of heirloom article of furniture that has been around for generations, finding its dwelling in differently-styled rooms.

STEPS FOR LAYERING COLORS

To use wax, rub a wax candle or bar of paraffin wax heavily over the areas where you want the color beneath to show through. Make sure you wipe away whatever loose wax with a make clean, dry out material before applying topcoat. Areas coated in the resist volition let the topcoat to be easily removed.

1. Apply basecoat colour. Let dry.
2. Apply resist of your choice.
3. Apply contrasting color over unabridged piece. Allow dry.
4. Use sandpaper to remove the topcoat of pigment on resist areas. Begin with light pressure to ensure only the top layer is removed.
5. If more intense distressing is desired, increase pressure level or use coarser grit sandpaper.
6. When satisfied with look, remove dust and apply Americana Decor Crème Wax or Varnish to seal.

TIP: Repeat steps ane-v to add a third layer of color to the slice past sanding down only enough to meet the second layer in some spots and the third layer in others.

Drybrushing is a technique that allows a lot of castor strokes and underlying colour to show through. It is a unproblematic technique to get an aged, weathered wait.

STEPS FOR DRYBRUSHING

1. Use basecoat. Permit dry.
2. Load a wide, dry chip brush with a very small amount of a contrasting color.
3. Blot brush on a paper towel to remove whatever excess.
4. Employ long strokes to lightly apply paint, dragging forth the surface.
5. Continue over unabridged piece, reloading as necessary.

TIP: If you prefer a polish pigment application with few brush strokes, dampen your brush before painting.

Americana Decor Chalky Cease paints can be easily mixed to create an endless array of custom colors. When mixing your paints, continue the following tips in mind:

• Make a mixing swatch nautical chart for reference by using one/4 teaspoons amounts of paint. Purchase one-time mixing spoons at flea markets for this. When you become to the color you want, write down the ratios on an index card and paint a swatch of the color on the card. This volition make repeating mixes easier in the future.
• Mix in a resealable container to keep for time to come utilise (clean glass or plastic jars piece of work well).
• For consistent proportions, employ a disposable cup to measure paint. Mark a fill line with a permanent marker and comprehend the mark with transparent tape to prevent it from rubbing off.
• Stir mixture with a palette knife or a popsicle stick. Small amounts of pigment are easier to mix.
• Mix more than paint than you lot remember you lot'll need, to take on hand for touch on-ups and sample swatches.

Create these colors by mixing Americana Decor Chalky End colors in the proportions listed under each swatch.

Americana Decor Prototype Transfer Medium is the ideal medium for use with your ain light amplification by stimulated emission of radiation copies. Add old-earth, European, shabby chichi, and vintage imagery to article of furniture and home decor accents.

STEPS FOR TRANSFERRING IMAGES

1. Trim your paradigm to desired size. Use images made on a laser printer or copier (dry toner) using lightweight paper.
2. Apply medium to the image and surface. Allow dry.
3. Utilize another coat of medium to the image and surface.
4. While withal wet, position the image confront downward on the surface.
5. Smooth out whatever creases or air bubbling and remove excess medium with a clammy fabric.
6. Allow to dry out for 8 hours.
7. In one case medium is dry, wet the paper thoroughly with a sponge and permit sit for ii-five minutes.
8. Employ a soft sponge or fingertips to rub away paper layers. Allow dry.
9. Repeat wetting procedure until all paper has been removed.

TIP: When transferring words, exist sure to print a mirror image so the final piece will read correctly.

TIP: For added durability, also employ Paradigm Transfer Medium equally a topcoat.

TIP: To use on cloth, pre-wash first. If working with layers of fabric, insert a piece of cardboard covered with wax paper betwixt the layers to prevent sticking. Permit to dry 72 hours earlier hand-washing. Air dry. Do not dry clean or atomic number 26. For a car washable cease, topcoat with Americana Material Decou-Page and allow dry for 72 hours prior to machine washing.

Utilize the stencils before distressing or sealing the surface to ensure the image looks like it aged with the slice and isn't simply sitting on acme of the surface.

STEPS FOR STENCILING

1. Position stencil. Utilise stencil adhesive or painter'southward tape to prevent the stencil from sliding.
2. Apply stencil brush or corrective sponge to utilise paint inside open up stencil areas.
3. Remove stencil.
4. Seal finished piece with Americana Decor Crème Wax or Varnish.

TIP: Brand certain to blot almost of the paint off the brush or sponge before applying to the stencil. This helps forbid pigment from bleeding under the stencil. Practice several light applications for best results.

APPLYING CLEAR OR WHITE WAX

1. Utilize a brush or lint-free rag to employ. Immediately wipe off whatsoever backlog.
2. Allow the start glaze of wax to dry and then apply a second coat. Test it to make sure it isn't sticky or tacky. Then add more wax. Thin coats are all-time. Too much wax volition be difficult to buff and may outcome in a splotchy terminate.
3. Use a clean, lite color textile to vitrify. (The dyes in colored fabrics may discolor the finish.) For a glossier sheen, buff the wax as before long equally it is no longer tacky.

TIP: When using Chalky Terminate paint on cloth, such as a chair seat, utilize wax as a finish to assist protect the paint and make it easier to clean. It volition not scissure similar other brands of wax will.

TIP: To achieve a metallic look, Clear Crème Wax can be tinted with acrylic metallic pigment. Other colors tin be achieved by mixing with other water-based paints. The ability to combine our water-based waxes with other paints opens up a huge array of finishing possibilities that aren't available with other oil-based waxes.

USING DARK WAXES

Lite Gold and Deep Brown Crème Waxes volition give the slice a very different finished look. Darker waxes change the intensity of the color significantly, so test on a modest area earlier applying to entire piece.

The nearly important thing virtually using darker waxes is they must exist applied over the Clear Crème Wax while it is still fresh. If non, the darker waxes will seep into the paint and won't be workable. Also, the pigment volition become permanently discolored.

Use the aforementioned basic method for applying Clear Crème Wax. Wipe back the Calorie-free Golden or Deep Brownish Crème Wax immediately, leaving color in crevices.

TIP: If the color is darker than desired, use a make clean rag to use Articulate Crème Wax over the areas that are also dark. Then utilize a clean rag to remove excess colour.

TIP: If the Low-cal Gilt or Deep Brown Crème Wax will be added to areas distressed with sandpaper, make certain raw forest areas are sealed with Clear Wax first. The darker waxes will stain the wood on whatsoever unsealed painted areas.

Americana Decor Chalky Finish paints are water-soluble. Brushes and other tools volition make clean easily with soap and water.

To make clean a finished piece, use soap and water on a soft rag or kitchen sponge. Clean up food or drink messes every bit soon as possible.

Re-wax the piece depending on how frequently you use it. Infrequently-used pieces tin can be waxed once a year or less. A kitchen table, on the other hand, should be waxed every three to four months. Consider using one of the Americana Decor Varnishes equally the topcoat on any pieces that volition become daily employ.

TIP: E'er clean jar threads before replacing jar lid. Leaving paint on jar threads will make information technology difficult to remove lids in the time to come.

• Chalky Terminate Color Chart
• Chalky Finish Color Mixing Guide

Become inspired with our craft and DIY project ideas made with Chalky Finish.
run into all projects

whiteroire1953.blogspot.com

Source: https://decoart.com/americana-decor/chalky-finish/education

Share this post